Linksys SRW248G4 fail firmware upgrade
- Download the image for Linksys SRW248G4 from Linksys web.
- Connect it with terminal (Tera Term)
- First configure it with:-
Baud Rate :- 38400When it done, then
Data :- 8 bit
Stop :- 1 bit
Parity :- None
Flow Control :- None
4. Power off then Power it ON
5. See the Power boot message
6. When it stuck on downloading code using XMODEM
7. Select the file transfer option in the Tera Term (or HyperTerminal ) menu and upload the file "SRW2xxG4_FW_1.2.3.0.ros" using XMODEM. It will take time (You can see it on screen) , but will recover the switch.
5. See the Power boot message
6. When it stuck on downloading code using XMODEM
7. Select the file transfer option in the Tera Term (or HyperTerminal ) menu and upload the file "SRW2xxG4_FW_1.2.3.0.ros" using XMODEM. It will take time (You can see it on screen) , but will recover the switch.
8. after reboot, you will see the login screen,
9. default user name is admin with no password.
Enjoy...!
0 comments:
Post a Comment